950 GC

950 GC Wheel Loader (Caterpillar)

Equipment:

Cold weather starting (batteries 2×1,400 CCA and ether starting aid)
Third hydraulic function, one single axis lever
Quick coupler control
Limited slip differentials
Autolube system
Air precleaner turbine
Ride control
Heated rear window
Air suspended seat
Secondary steering, electrical
Reversing cooling fan (auto/manual controlled)
Toolbox
Warning beacon
Extra working lights (4), Halogen or HID
Rearview camera
Radio
Fender extensions/roading

Specifications:

Net Power - ISO 9249 202.0 hp
151.0 kW
Engine Model Cat® C7.1
Bore 4.1 in
105.0 mm
Stroke 5.3 in
135.0 mm
Displacement 427.8 in3
7.01 L
Max Gross Power @ 2,000 rpm - ISO 14396 229.0 hp
171.0 kW
Max Gross Torque @ 1,400 rpm 752.0 ft-lb
1020.0 N·m
Max Net Torque @ 1,300 rpm 687.0 ft-lb
931.0 N·m
Rated Gross Power @ 2,200 rpm - ISO 14396 225.0 hp
168.0 kW
Rated Net Power @ 2,200 rpm - ISO 9249 202.0 hp
151.0 kW
Operating Weight 41174.0 lb
18676.0 kg
Bucket Capacities 2.5 m3 to 4.4 m3 (3.3 yd3 to 5.75 yd3)
Steering System Pump Type Piston
Hydraulic Cycle Time - Lower, Empty, Float Down 2.8 Seconds
2.8 Seconds
Hydraulic Cycle Time - Dump, at Maximum Raise 1.2 Seconds
1.2 Seconds
Hydraulic Cycle Time - Raise from Carry Position 6.1 Seconds
6.1 Seconds
Hydraulic Cycle Time - Total Cycle Time 10.1 Seconds
10.1 Seconds
Implement System Pump Type Piston
Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min 4047.0 psi
27900.0 kPa
Implement System - Maximum Pump Output @ 2,200 rpm 65.5 gal/min
248.0 L/min
Implement System - Optional 3rd Function Maximum Flow 74.0 gal/min
280.0 L/min
Implement System - Optional 3rd Function Maximum Pressure @ 70 L/min 2999.0 psi
20680.0 kPa
Cooling System 12.7 gal
48.0 L
Crankcase 5.3 gal
20.0 L
Transmission 11.9 gal
45.0 L
Differentials and Final Drives - Front 10.6 gal
40.0 L
Differentials and Final Drives - Rear 10.0 gal
38.0 L
Hydraulic Tank 31.7 gal
120.0 L
Fuel Tank Size 76.6 gal
290.0 L
Forward 1 4.4 mph
7.0 km/h
Forward 2 7.8 mph
12.5 km/h
Forward 3 13.7 mph
22.0 km/h
Forward 4 21.1 mph
34.0 km/h
Reverse 1 4.4 mph
7.0 km/h
Reverse 2 7.8 mph
12.5 km/h
Reverse 3 13.7 mph
22.0 km/h
Brakes Brakes meet ISO 3450
ROPS/FOPS ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards
Choices Choices include: 23.5-25 16PR, L3 (Triangle); 23.5R25 ★★, L3 (Triangle); 23.5R25 ★, L3 (Bridgestone)
Breakout Force 33047.0 lb
147.0 kN
Note **Compliance to ISO (2007) 14397-1 Sections 1 thru 5.
Note *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Static Tipping Load Full 40° Turn - ISO 14397-1* 23155.0 lb
10503.0 kg
Static Tipping Load Full 40° Turn - Rigid Tires** 24685.0 lb
11197.0 kg
B-Pin Height 13.7 ft
4188.0 mm
B-Pin Height @ Carry 2.2 ft
655.0 mm
Lift Arm Clearance 12.0 ft
3649.0 mm
Height to Top of ROPS 11.4 ft
3458.0 mm
Height to Top of Exhaust Pipe 11.8 ft
3596.0 mm
Height to Top of Hood 8.4 ft
2568.0 mm
Ground Clearance 1.5 ft
460.0 mm
Center Line of Rear Axle to Edge of Counterweight 6.6 ft
2001.0 mm
Wheelbase 10.8 ft
3300.0 mm
Center Line of Rear Axle to Hitch 5.4 ft
1650.0 mm
Rack Back @ Maximum Lift 60.0 Degrees
60.0 Degrees
Dump Angle @ Maximum Lift 52.0 Degrees
52.0 Degrees
Rack Back @ Carry 45.0 Degrees
45.0 Degrees
Rack Back @ Ground 40.0 Degrees
40.0 Degrees
Height to Center Line of Axle 2.5 ft
750.0 mm
Turning Radius to Inside of Tires 11.2 ft
3419.0 mm
Turning Radius to Outside Edge of Counterweight 20.3 ft
6190.0 mm
Turning Radius to Outside of Tires 20.2 ft
6164.0 mm
Width Over Tires 9.0 ft
2745.0 mm

Sales Literature

950 GC Product Brochure

360° Exterior View (HTML)

360° Exterior view. Double click on the image to zoom in on any area of the product.

360° Interior View (HTML)

360° interior view. Double click on the image to zoom in on any area of the product.